aggregate impact value lab report

IMPACT VALUE OF AGGREGATE - iricen.gov

The aggregate impact value gives a relative measure of the resistance of an aggregate to sudden shock or impact, which in some aggregates differs from its resistance to a slow compressive load. 2.Apparatus Required Fig. 1: Balance Balance should be accurate upto 1 g Fig. 2: Sieves Seives required are 12.5, 10.0 and 2.36 mm Fig. 3: Impact ...

More

Lab Report.docx - Determination of Aggregate Impact Value ...

Crush samples having an impact value of 12.5% fall in the category of 10-20%, therefore, the aggregate test sample is classified as strong and can be seen in the table below. The aggregate impact value is useful for selecting the good aggregates for road construction. Aggregate appropriate for cement wearing course should have maximum AIV of 30%.

More

Aggregate Impact Value Test Impact Test Of Aggregate ...

May 21, 2020  Aggregate impact value is the ratio of the weight of the fraction passing through 2.36 mm (weight W2) by the total weight of the sample (weight W1 + W2). Aggregate Impact Value = (W2/ (W1+W2)) * 100 = 80 gm / 300 gm = 26.67 (Impact Value) Where, W1= Weight of the fraction passing through 2.36 mm IS sieve.(220 gm)

More

AIV Lab Report - StuDocu

The Aggregate Impact Value (AIV) (M2/M1)x100 19.17 % 23.17 %. AIV = M2/M1 * 100%. Average aggregate impact value of the sample is 21.17 %. DISCUSSION 1. Give the impact value of a good aggregate to ensure the strength of the. aggregate used in road construction. -Aggregate impact value is measure of toughness of aggregate.

More

Aggregate Impact Value PDF Weight Brass

Aggregate Impact Value (BS 812: Part 3) 1. Objective. To determine the aggregate impact value in the laboratory. 2. Introduction. Impact value of an aggregate is the percentage loss of weight particles passing 2.36mm sieve by the application of load by means of 15 blows of standard hammer and drop, under specified test condition.

More

Determination of Aggregate Impact Value - Impact Test on ...

Feb 22, 2010  The aggregate impact value is a measure of resistance to sudden impact or shock, which may differ from its resistance to gradually applied compressive load. Procedure o f Aggregate Impact Test The test sample consists of aggregates sized 10.0 mm 12.5 mm. Aggregates may be dried by heating at 100-110° C for a period of 4 hours and cooled.

More

Exp 4 Aggregate Impact Value - Civil Engineers PK

Aggregate Impact Value. The test sample shall consist of aggregates the whole of which passes through ½ in B.S. test sieve and is retained on a 3/8 in B.S. test sieve. The aggregate comprising the test sample shall be dried in an oven for a period of four hours at a temperature of 100-110 °C and cooled.The measuring cup shall be filled about ...

More

Aggregate Impact value Test Apparatus, Procedure and uses ...

Jul 01, 2019  Procedure of Aggregate Impact value test. The test sample: normally aggregates sized 10.0 mm to 12.5 mm. the aggregates should be dried by

More

Determine of Aggregate Impact Value Test: BS 812

Oct 27, 2017  The Impact value of an aggregate is the percentage loss of weight particles passing 2.36mm sieve by the application of load by means of 15 blows of standard hammer and drop, under specified test condition. AIV gives A relative measure of the resistance of an aggregate to sudden impact, which is differs from withstand to slowly applied ...

More

Lab Report.docx - Determination of Aggregate Impact Value ...

Crush samples having an impact value of 12.5% fall in the category of 10-20%, therefore, the aggregate test sample is classified as strong and can be seen in the table below. The aggregate impact value is useful for selecting the good aggregates for road construction. Aggregate appropriate for cement wearing course should have maximum AIV of 30%.

More

IMPACT VALUE OF AGGREGATE - iricen.gov

The aggregate impact value gives a relative measure of the resistance of an aggregate to sudden shock or impact, which in some aggregates differs from its resistance to a slow compressive load. 2.Apparatus Required Fig. 1: Balance Balance should be accurate upto 1 g Fig. 2: Sieves Seives required are 12.5, 10.0 and 2.36 mm Fig. 3: Impact ...

More

AIV Lab Report - StuDocu

The Aggregate Impact Value (AIV) (M2/M1)x100 19.17 % 23.17 %. AIV = M2/M1 * 100%. Average aggregate impact value of the sample is 21.17 %. DISCUSSION 1. Give the impact value of a good aggregate to ensure the strength of the. aggregate used in road construction. -Aggregate impact value is measure of toughness of aggregate.

More

aggregate impact value lab report - nickel-propre

precaution aggregate crushing value experiment. This test is done to determine the aggregate impact value of coarse , Lab report. Experiment to Determine the aggregate impact value of different coarse aggregate samples, (BS 812), Aggregate impact value test, plain reinforced concrete.

More

Determination of Aggregate Impact Value Impact Test on

Lab Report of Los Angeles Abrasion Test on a Given Sample. The Los Angeles test is a measure of degradation of mineral aggregates of standard gradings resulting from a combination of actions including abrasion or attrition, impact, and grinding in a rotating steel drum containing a

More

Determine of Aggregate Impact Value Test: BS 812

Oct 27, 2017  The Impact value of an aggregate is the percentage loss of weight particles passing 2.36mm sieve by the application of load by means of 15 blows of standard hammer and drop, under specified test condition. AIV gives A relative measure of the resistance of an aggregate to sudden impact, which is differs from withstand to slowly applied ...

More

Highway Lab Report 1.docx - DCC 3122 GEOTECHNICAL AND ...

View Highway Lab Report 1.docx from EN MISC at Politeknik Malaysia Tuanku Sultanah Bahiyah. DCC 3122 GEOTECHNICAL AND HIGHWAY LABORATORY AGGREGATE IMPACT VALUE LECTURER : PN. ASIAH BINTI ARIFFIN DKA

More

*determination of aggregate crushing value lab report ...

2013511- conclusion aggregate impact value report The Value of Libraries Inside Higher Ed While it is more of a literature review than a how-to . read more; advantages aggregate crushing value test report more advantages aggregate crushing value test reportonline chat .Can on use the crushing value test in place of the impact value test?. read more

More

7 LAB TESTS ON AGGREGATE TO CHECK QUALITY FOR USE IN

Sep 12, 2015  The crushed aggregate is allowed to pass through 2.36 mm IS sieve. And the impact value is measured as percentage of aggregates passing sieve (W2) to the total weight of the sample (W1). Aggregate impact value = (W1/W2)*100. Aggregates to be used for wearing course, the impact value shouldn’t exceed 30 percent.

More

DETERMINATION OF AGGREGATE CRUSHING VALUE

Aggregate impact value (%) Quality of aggregate 35 Weak for road surfacing Table 2: Maximum allowable impact values of aggregate in different types of Pavement material/ layers Sl.No Types of pavement material /layer Aggregate impact value (%) 1 Water bound ...

More

Aggregate Impact Value Testing AIV TEST - Civil ...

Jan 09, 2018  Aggregate Impact Value Test. AIV test is conducted to determine the Aggregate Impact Value of Coarse aggregate. The aggregate impact value gives a relative measure of the resistance of an aggregate to sudden shock or impact, which in some aggregates differs from Its resistance to a slow compression load. The Indian Standard CODE IS 2386 (Part ...

More

IMPACT TEST ON AGGREGATE - Welcome to Virtual Labs

Impact value of aggregate: is a measure of resistance to sudden impact or shock, which may differ from its resistance to gradually applied compressive load. STEP 1 Take coarse aggregate in a pan and measure it to 350g using the weighing balance.

More

Determination Of Aggregate Crushing Value Lab Report

Aggregate Impact Value Lab Report. Dec 15 2017183 dcc3113 determination of aggregate impact value 1 1 civil engineering deparment dcc 3122 highway lab report title determination od aggregate impact value course session dcc 3122 geotechnic and highway laboratory prepare by aggregate impact value test lab report example aggregate impact value ...

More

Aggregate impact and crushing test - SlideShare

Feb 08, 2012  The aggregate impact value (AIV) is B AIV = × 100 (%) . . . (1) ARESULTSAn average is taken of the two tests and the result is recorded to the nearestwhole number as the Aggregate Impact Value.The AIV is normally about 105 per cent of the Aggregate Crushing Value and itcan be used for the same purpose. For weak aggregates, the required load ...

More

Aggregate Impact Value Test - Procedure Uses - [Civil ...

The average value of the two samples is the Impact Value of Aggregate. Lab Test Report Format. SI: Description: Sample 1 in grams: Sample 2 in grams: 1: Weight of dried sample (W1) 340: 360: 2: Weight of crushed particle passed through 2.36mm sieve (W2) 50: 65: 3: Impact value of Aggregate

More

Determination of Aggregate Impact Value Impact Test on

Lab Report of Los Angeles Abrasion Test on a Given Sample. The Los Angeles test is a measure of degradation of mineral aggregates of standard gradings resulting from a combination of actions including abrasion or attrition, impact, and grinding in a rotating steel drum containing a

More

7 LAB TESTS ON AGGREGATE TO CHECK QUALITY FOR USE IN

Sep 12, 2015  The crushed aggregate is allowed to pass through 2.36 mm IS sieve. And the impact value is measured as percentage of aggregates passing sieve (W2) to the total weight of the sample (W1). Aggregate impact value = (W1/W2)*100. Aggregates to be used for wearing course, the impact value shouldn’t exceed 30 percent.

More

(DOC) Aggregate crushing value Test Lab Report Adnan ...

Name of the experiment: Aggregate Crushing value test. Objective: 1. Determine the aggregate crushing value of coarse aggregate. 2. Assess suitability of coarse aggregates for use in different types of road. Theory: The “aggregate crushing value” give a relative measure of the resistance of an aggregate to crushing under gradually applied ...

More

determination of aggregate crushing value lab report ...

conclusion of aggregate impact value lab report. Experiment No. 4: Determination of the aggregate impact value of different coarse aggregate samples. (BS 812) Scope significance: Aggregate Impact Value... Get Price. Aggregate Crushing Value test – we civil engineers. 23 Jan 2018 ... Aggregate Crushing Value test ...

More

CE 354 Transportation Engineering Sessional I (Lab Manual)

compressive load. With aggregate of aggregate impact value (AIV) higher than 30 the result may be anomalous. Also aggregate sizes larger than 14 mm are not appropriate to the aggregate impact test. The standard aggregate impact test shall be made on aggregate passing a 14. mm BS test sieve and retained on a 10.0 mm BS test sieve. If required ...

More

*determination of aggregate crushing value lab report ...

2013511- conclusion aggregate impact value report The Value of Libraries Inside Higher Ed While it is more of a literature review than a how-to . read more; advantages aggregate crushing value test report more advantages aggregate crushing value test reportonline chat .Can on use the crushing value test in place of the impact value test?. read more

More

Aggregate impact and crushing test - SlideShare

Feb 08, 2012  The aggregate impact value (AIV) is B AIV = × 100 (%) . . . (1) ARESULTSAn average is taken of the two tests and the result is recorded to the nearestwhole number as the Aggregate Impact Value.The AIV is normally about 105 per cent of the Aggregate Crushing Value and itcan be used for the same purpose. For weak aggregates, the required load ...

More

Polished Stone Value - Test Procedures and Equipment

The percentage mass of fines (passing a 2.80mm BS test sieve) formed in the test is known as the aggregate impact value AIV. higher values are given by weaker materials. For the majority of aggregates the impact value and the crushing value are similar, but brittle materials such as flints yield impact values which are about 5 units higher than ...

More

IS 2386-4 (1963): Methods of test for aggregates for ...

a) Determination of Aggregate Crushing \‘alue, b) Determination of the 10 percent Fines Value, c) Determination of Aggregate Impact Vaiue, d) Determination of Aggregate Abrasion Value, e) Determination of the Polished Stone Value, and f) Determination of Crushing Strength. 2.

More

Lab Test on Aggregates at Site - CivilJungle

Procedure of Impact Value of Coarse Aggregate. The impact machine shall rest without wedging or packing upon the level plate.; The cup shall be fixed firmly in position on the base of the machine and whole of the test sample placed in it subject to fifteen blows of the metal hammer of weight 14 kg falling from a height 38 cm.

More

determination of aggregate crushing value test

DETERMINATION OF AGGREGATE IMPACT VALUE. Dec 15, 2017 dcc3113 determination of aggregate impact value. 1. 1 civil engineering deparment dcc 3122 highway lab report title determination od aggregate impact value course / session dcc 3122 – geotechnic and highway laboratory prepare by group group a group members 1.

More

impact value of aggregate - BINQ Mining

Aug 27, 2009  Aggregate Impact Value Test – YouTube. 27 Aug 2009 Impact value of an aggregate is the percentage loss of particles passing sieve by the application or load by means of 15 blows of »More detailed

More

Impact Test on Aggregates - GharPedia

An impact value is measured as % of aggregates passed through the 2.36mm sieve ( W2) to the total weight of the sample ( W1 ). Aggregate impact value (The value of aggregate impact test) = (W1/W2)*100. The value of aggregate impact test should not be more than 45% by weight of aggregates, used for concrete other than wearing surface.

More

Copyright © 2020.Company name All rights reserved.SiteMap